Scientists Convert Old Tires Into High-Value Materials

Date:

Tires are manufactured for single use from a non-renewable resource. Some are broken down into crumbs to use as fillers in cement, asphalt, or artificial turf, and as fuel in the cement industry. However, there is no suitable method to recover the petroleum-based polymers from which they are made, and that’s why it’s difficult to reuse, recycle, or effectively repurpose.

Thankfully, scientists and inventors around the world have developed different methods of converting rubber from old tires into high-value materials, roads, and even playgrounds.

Recovering Polymeric Oils To Generate New Elastomers

A team of chemists at McMaster University discovered a new way to break down and dissolve the rubber used in automobile tires by breaking its sulfur-to-sulfur bonds.

Professor Michael Brook, the lead author of the study, said:

The chemistry of the tire is very complex and does not lend itself to degradation — for a good reason. The properties that make tires so durable and stable on the road also make them exceptionally difficult to break down and recycle.

In the 1850s, Charles Goodyear developed the technique of curing ties by combining natural rubber with sulfur, which forms bridges between the natural polymers and converts the mixture from fluid to solid rubber.

In the paper, outlined in the journal Green Chemistry, researchers describe how they break down the polymeric oils by breaking the sulfur-to-sulfur bond. Professor Brook compares the overall structure to a fishnet. “We have found a way to cut all the horizontal lines, so instead of having a net, you now have a large number of ropes, which can be isolated and reprocessed much more easily,” he explained.

How the chemical process works:

  • First, the tires are cut into sections
  • Then, the tires are turned into powdered crumb
  • These crumbs are heated with specific silicones at 100°C (212°F) for 45 minutes to produce a mild and rapid reaction
  • The reaction converts about 90% of the available organic materials into a readily processed light-yellow oil
  • Any remaining substances, such as inorganic carbon, polyester cord fibers, metal, and silica, are removed via filtration

The oils recovered from old tires in this process are very similar in structure to the virgin polymers used to make new tires.

Multi-Use Aerogel From Tire Waste

Scientists from the National University of Singapore (NUS), developed a method to convert old tire rubber into aerogel. Aerogels are ultra-lightweight and porous synthetic materials that are derived from a gel, while the liquid component of that gel is replaced with a gas.

Converting Old Tires Into High-Value Materials
The NUS research team, with samples of the aerogel. Credit: National University of Singapore

The team, led by Professor Nhan Phan-Thien and Associate Professor Duong Hai-Minh first shredded old tires into fine rubber fibers. Then, those fibers were soaked in a solution consisting of water and a small portion of eco-friendly solvents, which caused the fibers to cross-link with each other. For about 20 minutes, the mixture was mechanically stirred, creating a gel in which the linked fibers were suspended. After, the gel was poured into molds and freeze-dried at a temperature of -58ºF (50ºC) for 12 hours.

The final result is a solid, lightweight, highly absorbent rubber aerogel, which can be used to soak up oil spills or thermal and acoustic insulation. If the material is coated with methoxy-trimethyl silane, it can be made water-resistant. Most traditional aerogels are brittle, but the team claims that this one is highly durable.

Associate Professor Hai-Minh explained:

The fabrication process is simple, cost-effective, and eco-friendly. The entire production process takes between 12 to 13 hours to complete, and it only cost less than S$10 [about US$7] to produce a sheet of rubber aerogel that is 1 sq. m [10.8 sq. ft] in size and 1 cm [0.4 in] thick. The process can also be easily scaled up for mass production. This makes rubber aerogels a commercially attractive product.

A paper on the fabrication and many properties of rubber aerogels made from car tire waste is published in Colloids and Surfaces A: Physicochemical and Engineering Aspects.

Playgrounds And Turf From Tire Waste

The ATR-300, sold by a Russian company, is a rubber eating machine that recycles tires. The machine turns the old tires into rubber bits that are then added to playgrounds or artificial turf to soften the surface for athletes or children.

Here how the machine works:

  • First, the tires get cut into small segments
  • Then, the segments are ground up multiple times into smaller chips
  • Steel fibers and the textile cord is removed along the way
  • The rubber gets cleaned and sorted
  • Finally, you have the base for artificial turf

Watch the rubber eating machine in action in the video below.

Building Roads From Old Tires

Professor Pilakoutas from the University of Sheffield and his team made energy-saving concrete using the steel fibers that come from the tire waste. In the video below, the team tested the material to check its durability.

Luana Steffen
Luana Steffen
I am an artist who enjoys sharing interesting information and creative thinking with the world to inspire people.

Share post:

Popular

AirLoom Wind Turbine Tested: Can Track Wings Cut Wind Cost?

The AirLoom wind turbine replaces massive steel towers and...

CO2 to Chemicals Catalyst Turns Emissions Into Cleaning Ingredients

Turning waste carbon dioxide into everyday materials has hit...

Seaweed Packaging That Vanishes Like Fruit Skin

An apple peel or banana skin protects delicate food...

Why Water Quality Deserves More Attention in Modern Homes

If you think clean water at home is just...